Food & Beverage Filtration Products

Choose your application…

 

Sterile Liquid Filtration

Sterile liquid filtration is critical the food or beverages quality, shelf life, and safety of the products. Sterilizing grade filters for this industry increase shelf live of the product removing organisms that would spoil the food. Sterilizing grade filters are used in a variety of applications such as water, brewing, dairy, food ingredients, soft drinks, spirits, and wine.

ProductMembraneMain Construction MaterialGrade
PPPESHydrophobic PTFEHydrophilic PVDFNylonGlass FiberMetalSpecialtyPPMetalSterilizingBio-Burden Reduction / Clarification
BevPure Plus →
BevPure XL →
BevPure →
BevPure PV →
TefloFlow HT →

View Key Features & Benefits by Series | Sterile Liquid Filtration

BevPure Plus Series

FBProductGroup

BevPure® Plus Filter Cartridges have been established as a new generation of PES membranes in sterilizing grade filtration. The unique double-layer PES membrane provides excellent microbiological retention with economical filtration.
Highest Level of Microbiological Process Safety
BPP Filter Cartridges can be steam or hot water sterilized frequently for longer service life. They can be used in a wide range of food and beverage applications which demand the highest level of microbiological process safety.
Industry-Standard End Caps, Nominal Lengths
BevPure® Plus Filter Cartridges are available in a variety of industry-standard end fittings for easy installation into existing configurations. The filters are available from 5" to 40" lengths to meet all process flow needs.

Double-layer membrane

Asymmetric+Symmetric PES provides excellent reliability and safety

Asymmetric pre-filter layer

Provides longer service life and more economical costs in standard filter size

Large effective filtration area

The 0.58m2/10inch filtration area delivers long life, high flow efficient filtration

Designed for extensive steam sterilization cycles

Steam sterilization up to 100 sterilization cycles ensures long-life microbiological process safety

Complies with food contact regulations

FDA 21CFR177-182 "Non-fiber releasing" and 1935/2004 EC compliance for food contact process safety

Specs, Flow Curves, and Part Number Configurator →

BevPure XL Series

FBProductGroup

BevPure® XL Filter Cartridges have a unique single-layer asymmetric hydrophilic PES membranearrangement which delivers excellent throughput, high particle holding capacity, and durability. Theextremely high flow rates in comparison to other sterilizing grade fi lter media can signicantly reducefi ltration costs.
Industry Standard End Caps, Nominal Lengths
BevPure® XL Filter Cartridges are available in a variety of industry-standard end fi ttings for easyinstallation into existing confi gurations. The fi lters are available from 5" to 40" lengths to meetall process flow needs.

Highly asymmetric PES membrane

Provides high particle holding capacity for longer service life

Integrity tested

Each filter is individually Integrity Tested prior to shipment

Retention ratings

Available in ratings from 0.1μm to 1.2μm for precise bacteria and particle removal

Designed for extensive steamsterilization cycles

Steam sterilization up to 100 sterilization cycles ensures longlife microbiological process safety

Complies with food contact regulations

FDA 21CFR177-182 and 1935/2004 EC compliance to ensure process safety

Specs, Flow Curves, and Part Number Configurator →

BevPure Series

FBProductGroup

BevPure® Filter Cartridges have a single-layer hydrophilic PES membrane which delivers sterilizing filtration at the most economical cost. Hydrophilic PES membrane filters require no pre-wetting and are ready to use. These filters are recommended for the sterile filtration on a wide range of liquids e.g. diluting water and beverages.
Industry Standard End Caps, Nominal Lengths
BevPure® Filter Cartridges are available in a variety of industry-standard end fittings for easy installation into existing configurations. The filters are available from 5" to 40" lengths to meet all process flow needs.

Hydrophilic PES membrane

No prewetting of filter is required

Integrity tested

Each filter is individually Integrity Tested prior to shipment

Retention ratings

Available in ratings 0.1μm, 0.22 μm, and 0.45 μm for bacterial and particle removal

Designed for extensive steam sterilization cycles

Steam sterilization up to 100 sterilization cycles ensures long-life microbiological process safety

Complies with food contact regulations

FDA 21CFR177-182 and 1935/2004 EC compliance to ensure process safety

Specs, Flow Curves, and Part Number Configurator →

BevPure PV Series

FBProductGroup

BevPure® PV Filter Cartridges are made of unique hydrophilic polyvinylidene fluoride (PVDF) membrane characterized by high throughput and low binding. These fi lters are suitable for the sterilized filtration of a wide range of beverage applications.

Hydrophilic PVDF membrane

Low extractable and protein binding
Broad chemical compatibility and temperature resistance
Excellent durability proven by testing forward/reverse pulse up to 100x
Ideal for the removal of particles and beverage-spoiling microorganisms

Bacterial Retention

Retention of 107 cfu/cm2 Brevundimonas diminuta (ATCC® 19146) according to ASTM F838.

Quality Assurance

Manufactured in a facility which adheres to ISO 9001Practices.
100% Integrity tested and lot traceable.

Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182.

Specs, Flow Curves, and Part Number Configurator →

TefloFlow HT Series

FBProductGroup

TefloFlow HT Filter Cartridges are composed of hydrophobic PTFE membrane with polyphenylene sulfide (PPS) support layers, and oxidation-stabilized polypropylene hardware. This filter series is recommended for ozonated water venting applications, sterile gas, and high temperature liquid filtration.

Hydrophilc and Hydrophobic PTFE membrane filters with PPS supports

Oxidation-resistant materials provide longer service life in critical air and vent applications
Exceptionally high flow rates at low pressure drops
Rugged construction offers outstanding stability during steam sterilization
Wide chemical compatibility

Quality Assurance

Manufactured in a facility which adheres to ISO 9001:2015 Practices.
100% Integrity tested and lot traceable.

Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182 andd 1935/2004 EC.

Specs, Flow Curves, and Part Number Configurator →

Clarification or Prefiltration

Clarification or prefiltration is for the reduction of particulates and microbial contaminates through mainly a sieving process. This reduces the burden on the final filters making the liquid clearer. These filters extend the life of the final filters by removing heavy loading particulate matter. Clarification or prefilters are recommended in the beginning part the process where 100% of the retention of contaminates above their rated pore size is not required.

ProductMembraneMain Construction MaterialGrade
PPPESHydrophobic PTFEHydrophilic PVDFNylonGlass FiberMetalSpecialtyPPMetalSterilizingBio-Burden Reduction / Clarification
BevPure XL-EA →
BevPure NY →
BevClear BW →
BevClear AB →
BevClear XL →
Poliflow →
Meltgradient →
Guard GUF →
BevClear GF →
BevClear HF →
BevClear HFB →
Active Carbon →
CSD Lenticular →

View Key Features & Benefits by Series | Clarification or Prefiltration

BevPure XL-EA Series

FBProductGroup

BevPure® XL-EA Filter Cartridges have a single-layer asymmetric hydrophilic PES membrane arrangement which delivers excellent throughput, high particle holding capacity, and durability. These filters are designed for bio-burden reduction filtration to increase the service life of the final stage filters.

Highly asymmetric PES membrane

Requires no pre-wetting
Excellent chemical compatibility
Economical to protect final stage sterilizing filters
High particle-loading membrane

Specs, Flow Curves, and Part Number Configurator →

BevPure NY Series

FBProductGroup

BevPure® NY Filter Cartridges are composed of hydrophilic Nylon 66 membrane. These filters are specifically designed for bio-burden reduction and the final filtration of a wide range of food and beverage solutions.

Hydrophilic Nylon 66 membrane

Ideal for rapid wetability
High bubble point ensures a more reliable retention efficiency
Low pressure drop and high flow rates
Long service life

Specs, Flow Curves, and Part Number Configurator →

BevClear BW Series

FBProductGroup

BevClear®Filter Cartridges are constructed of nanofi ber media with support layers that allow maximum backwash cleaning efficiency. Characterized by its high particle holding capacity and flow rates, these filters are recommended for filtration in brewing applications.

Fine nanofiber media

Special design ensures backwash cleaning, increasing filter lifetime
Super fine nanofiber media provides high particle holding capacity and retention efficiency
Provides defined porosity with high filtration area

Particle Shedding

Autoclaved filter effluent meet the USP <788> for large volume injections

Non-Fiber Releasing

Component materials meet the criteria for a “Non-fiber-releasing filter” as defined in 21 CFR 210.3 (b) (6)

Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182, and EU framework regulation [1935/2004/EC].

Specs, Flow Curves, and Part Number Configurator →

BevClear AB Series

FBProductGroup

BevClear® AB Filter Cartridges are all-polypropylene pleated depth filters. Characteristics include 99% efficient multilayer media with high particle holding capacity, long service life, and extremely high flow rates. They provide efficient retention of particles in critical applications.

Two-layer pleated construction

Provides superior flow rate and extended service life

Nanofiber media

Provides excellent particle retention and filtration performance

All-polypropylene construction

100% polypropylene construction provides wide chemical compatibility

Specs, Flow Curves, and Part Number Configurator →

BevClear XL Series

FBProductGroup

BevClear® XL Filter Cartridges are all-polypropylene pleated depth filters with a graded pore size distribution from coarse (upstream) to fine (downstream) to capture particles gradually which improves filter service life. Filter characteristics include higher contaminant holding capacity and removal of particulates, colloids, and gels.

Graded pore size pleated depth filter construction

5-7 layers of PP media enables additional particle loading and flow capabilities
Eliminates particles according to pore size distribution which significantly increases filter lifetime

All-polypropylene construction

100% polypropylene construction provides wide chemical compatibility

Specs, Flow Curves, and Part Number Configurator →

PoliFlow Series

FBProductGroup

PoliFlow® Filter Cartridges are composed entirely of pleated polypropylene microfiber which provides great filtration performance with a low cost. Characteristics include high flow rates, high contaminant holding capacity and filtration efficiency making it the ideal solution for the pre-filtration of liquids.

All Polypropylene construction

Broad chemical compatibility makes it suitable for acids, bases, and solvents
High filtration efficiency
Pleated surface area provides superior flow rate and extended service life
100% thermally-welded design eliminates the need for adhesives which can be a contamination source
Available in nominal ratings from 0.2μm to 25μm for precise particle removal

Specs, Flow Curves, and Part Number Configurator →

Meltgradient Series

FBProductGroup

Meltgradient™ Series Depth Filters are made of melt-blown polypropylene with gradient pores and an inner layer of interwoven high-density nano-fibers. These cartridge filters are capable of efficiently capturing particles of different sizes, and performat at high flow rates for long lifetimes. The polypropylene raw material meets FDA requirements with extensive fluid compatibility, suitable for RO water pre-filtration and clarifi cation.

Melt-blown polypropylene media with gradient pores and inner layer of interwoven high-density nano-fibers

Provides high contaminant hold capacity and high removal efficiency at low pressure drop
>99.9% particle retention efficiency at rated pore size
Long service life, high flow rate due to the different linear diameters and unique interwoven density control process. Meltgradient has a porosity far beyond that of similar products, which results in lower pressure loss across the cartridge and higher contaminant-holding capacity.
Long fiber fusion and spray process with continuous fiber hot-melt interweave results in a rich and stable pore structure and high-purity filtration. No adhesive or surfactant, no silicone oil, low precipitate.
The cartridge can withstand up to 4 bar differential pressure.
Wide range of filtration rates from 0.1μm to 90μm to meet various operation conditions.

Quality Assurance

Manufactured in a facility which adheres to ISO 9001 Practices.
100% Integrity tested and lot traceable.

Particle shedding

Autoclaved filter effluent meets the requirements in USP <788> for large volume parenterals.

Non-fiber release

Component materials meet the criteria for a “Non-fiber-releasing filter” as defined in 21 CFR210.3 (b) (6).

Specs, Flow Curves, and Part Number Configurator →

Meltgradient Series

FBProductGroup

Meltgradient™ Series Depth Filters are made of melt-blown polypropylene with gradient pores and an inner layer of interwoven high-density nano-fibers. These cartridge filters are capable of efficiently capturing particles of different sizes, and performat at high flow rates for long lifetimes. The polypropylene raw material meets FDA requirements with extensive fluid compatibility, suitable for RO water pre-filtration and clarifi cation.

Melt-blown polypropylene media with gradient pores and inner layer of interwoven high-density nano-fibers

Provides high contaminant hold capacity and high removal efficiency at low pressure drop
>99.9% particle retention efficiency at rated pore size
Long service life, high flow rate due to the different linear diameters and unique interwoven density control process. Meltgradient has a porosity far beyond that of similar products, which results in lower pressure loss across the cartridge and higher contaminant-holding capacity.
Long fiber fusion and spray process with continuous fiber hot-melt interweave results in a rich and stable pore structure and high-purity filtration. No adhesive or surfactant, no silicone oil, low precipitate.
The cartridge can withstand up to 4 bar differential pressure.
Wide range of filtration rates from 0.1μm to 90μm to meet various operation conditions.

Quality Assurance

Manufactured in a facility which adheres to ISO 9001 Practices.
100% Integrity tested and lot traceable.

Particle shedding

Autoclaved filter effluent meets the requirements in USP <788> for large volume parenterals.

Non-fiber release

Component materials meet the criteria for a “Non-fiber-releasing filter” as defined in 21 CFR210.3 (b) (6).

Specs, Flow Curves, and Part Number Configurator →

Guard GUF Series

FBProductGroup

Cobetter GUF Long Service Life Filter Cartridges are made of non-woven polypropylene material. They provide excellent life time and efficiency, which is 2-3 times that of general melt-blown filters. GUF Filters are an exceptional value for general applications where long life, high contaminant holding, and low change out frequency are required. These filters are ideal for beverage and water treatment applications.

100% pure polypropylene depth filter

High contaminant-holding capacity
3x longer lifetime than standard meltblown filters
Reduced filtration cost with longer lifetime
Wide chemical compatibility

No wetting agents, solvents, surfactants, binders, or adhesives are used in the manufacturing process

Clean, long-life filtration

Thermally bonded material

Non fiber-releasing, clean, long-life filtration

Quality Assurance

Manufactured in a facility which adheres to ISO 9001Practices.

Indirect Food Additive 

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182 andd 1935/2004 EC.

Specs, Flow Curves, and Part Number Configurator →

BevClear GF Plus Series

FBProductGroup

BevClear® GF Plus Filter Cartridges are composed of positive Zeta modifi ed microfiber media and are ideal for the removal of contaminants such as colloids, yeast, and particles in brewing applications. This advanced media has high contaminant-holding capacity combined with high particle effi ciency compared to polypropylene filters.

Positive Zeta modified microfiber glass media

High contaminant holding capacity and excellent particle retention
Ideal for the retention of colloids
Low pressure drop and high flow rates and long service life
Excellent chemical compatibility

Quality Assurance

Manufactured in a facility which adheres to ISO 9001:2015 Practices
100% Integrity tested and lot traceable

Indirect Food Additive 

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182.

Specs, Flow Curves, and Part Number Configurator →

BevClear HF Series

FBProductGroup

BevClear® HF Filter Cartridges are a large diameter filter for high flow applications. The filter has an open-pleated construction with a 152 mm (6") diameter, high filtration area, and high flow rates up to 90m3/hr (396 gpm). It can be used in a wide variety of applications with large flow rate requirements and short downtime for change-out.

Graded pore size pleated depth filter construction

Large filtration area and depth filter construction provides high flow rates combined with low pressure drops and long service life
Eliminates particles according to pore size distribution which significantly increases filter lifetime
Flow rate configuration from inside-out ensures that all contamination is held within the single-open end of the filter
Quick and easy change-out

Quality Assurance

These products are manufactured in a facility which adheres to ISO 9001:2015 Practices. 100% Integrity tested and Lot traceable.

Indirect Food Additive 

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182.

Specs, Flow Curves, and Part Number Configurator →

BevClear HFB Series

FBProductGroup

BevClear® HFB Filter Cartridges are designed to repalce filter bags. (They can replaceSize 1 and Size 2 bag filters without an adaptor in standard housings.)The outside diameter is equal to standard filter bags, with a cartridge body outside diameter of 160mm and endcap outside diameter of 180 mm.The filtration area is 8x times greater than the filtration area of filter bags.Upgrade your system for faster flow and longer filter life by moving to theBevClear HFB filters.

Sized for direct replacement of bag filters

Fits most Size 1 and Size 2 bag housings with no hardware adaptors

Unique sealing design

"O" O-ring + "U" O-ring ensures no leakage and adjusts to fit most bag filter housings

Large filtration area

Large filtration area and gradient pore structure ensures high flow rates and longer lifetime

Outside net of PET

Outside Net Structure of PET improves construction stability

Quick-changeout design

Quick and easy changeout with a large central handle to make installation and removal efficient

Specs, Flow Curves, and Part Number Configurator →

Active Carbon Filter Series

FBProductGroup

ACF Series Filter Cartridges are made from active carbon fiber wrapped in non-woven polypropylene. The filters combine the performance of depth filtration and the adsorption of activated carbon fiber. The outside layer of polypropylene media can remove particles, and the activated carbon can remove chlorine, foul taste and odors, and organic matter effectively.

Combined polypropylene outer media with inner activated carbon media

Multi-media construction provides high flow rates with good adsorption capability
Wide chemical compatibility
High resistance to acid and alkali liquids
Strong absorption ability to remove chlorine, pigments, and odors
No fiber release

Specs, Flow Curves, and Part Number Configurator →

CSD Lenticular Filter Series

FBProductGroup

The Lenticular CDS Filter Series use a composite material composed of high purity lignocellulose and inorganic filter aid agent. Its inner three-dimensional structure allows it to be a depth filter while providing excellent filtration efficiency, high contaminant holding capacity and longer lifetime.The Lenticular CSD Filter Series combines an assortment of filter disks in one filter unit for easy installation. The edges of each filter disc are sealed through an injection molding process which ensures the integrity of the entire filter. This structure provides excellent stability against filter damage from long-term use.All raw materials are tested by strict quality control procedures to ensure the filter quality and performance capabilities.
Excellent Retention Efficiency
As an inorganic filter aid, the naturally porous structure of the diatomite results in good adsorption and an increase in permeability. There is a small amount of synthetic resin in the filter paper which improves the wet strength of the paper, and provides a positive charge which adsorbs the negative charges, endotoxin, and other substances.
Filter Use Characteristics
Using a high purity cellulose, reduces the level of ion precipitation and endotoxin making the CSD Series suitable for food and beverage and other high purity applications. The filter designs solve many of the problems found in typical disk-style filters such as leakage, heavy use, and high costs.

Cellulose filtration media with inorganic filter aid

High contaminant holding capacity and longer lifetime
High-purity, absorbs negative chargers, endotoxin, and other substances

Sealed ends disk filter stacks

High flow, stability against filter damage and layer leak-through
Excellent stability for long-term use

Specs, Flow Curves, and Part Number Configurator →

Gas, Steam or Vent

Gas, steam or vent filtration is the separation of particulate matter from a gas stream. Filtration of gas has many applications from venting of tanks to keep out contaminations while the tanks are being emptied, to filtration of N2 or CO2 for filtration of blanket gases or steam filtration. It is critical to know the gas and the applications to properly determine the correct filter for the process.

ProductMembraneMain Construction MaterialGrade
PPPESHydrophobic PTFEHydrophilic PVDFNylonGlass FiberMetalSpecialtyPPMetalSterilizingBio-Burden Reduction / Clarification
GasClean →
TefloGas →
PSSF Pleated SS →
PSSC Pleated Felt SS →

View Key Features & Benefits by Series | Gas, Steam or Vent

GasClean Series

FBProductGroup

GasClean® Filter Cartridges are composed of super-fine glass microfiber with high contaminant-holding ability. They are highly recommended for the pre-filtration of gas for effective protection of sterilizing grade membrane filters to significantly increase service life.

Super-fine glass fiber membrane

High porosity for high flow rates and low pressure drops
>90% particle retention efficiency
Protects final sterilizing grade air filters for long service life

Quality Assurance

Manufactured in a facility which adheres to ISO 9001 Practices.
100% Integrity tested and lot traceable.

Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182

Specs, Flow Curves, and Part Number Configurator →

TefloGas Series

FBProductGroup

TefloGas® Filter Cartridges are composed of hydrophobic PTFE membrane in a specially designed, unique thermal-resistant polypropylene core. They are characterized by a high filtration area and high-temperature resistance. Each filter is individually integrity tested to ensure microbiological safety. They are highly recommended for all air and gas sterilizing grade applications in food and beverage, e.g. fermentation processes.

Hydrophobic PTFE membrane filters with PPS supports

Oxidation-resistant materials provide longer service life in critical air and vent applications
Exceptionally high flow rates with low pressure drops
Highly recommended for all air and gas sterilization grade applications in food and beverage, for example fermentation processes

Quality Assurance

Manufactured in a facility which adheres to ISO 9001:2015 Practices
100% Integrity tested and lot traceable

Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182

Specs, Flow Curves, and Part Number Configurator →

PSSF Series

FBProductGroup

PSSF Stainless Steel Pleated Felt Filter Cartridges are composed of stainless steel sintered felt. These filters have a large filtration area with high flow rates and low pressure drops.The unique stainless steel sintered felt is made from stainless steel fibers which have been sintered to form a high-porous depth filtration material.
PSSF Filter Cartridges features include a graded pore size from course (upstream) to fine (downstream) fibers, which results in a higher contaminant holding capacity with excellent filtration efficiency and longer service life. These filters are widely used in steam filtration or liquids applications with high viscosities, e.g. sugars and syrups.

All stainless steel construction

Excellent chemical compatibility
High temperature resistance

Sintered specialized alloy construction

High corrosion and oxidation resistance
Can be cleaned and reused

Absolute graded pore size rated media

Precision particulate retention ratings

Specs, Flow Curves, and Part Number Configurator →

PSSC Series

FBProductGroup

PSSC Pleated Stainless Steel Wire Cloth Filter Cartridges are composed of 316 stainless steel wire cloth. The pleated structure provides a large filtration area which results in longer service life and higher flow rates.
PSSC Filter Cartridges have superior strength and thermal resistance which make them ideal for high pressure and temperature applications.

All stainless steelconstruction withpleated wire cloth and inside support layer

Excellent chemical compatibility
High temperature and pressure resistance
High corrosion and oxidation resistance
Non-fiber releasing

Absolute gradedpore size rated media

Homogenous pore sizes
Precision particulate retention ratings

Constructed for cleaning and reuse

Able to be cleaned and reused
High pressure back-flushing available

Specs, Flow Curves, and Part Number Configurator →

High Temperatures or High Viscosity

For high temperature or highly viscous chemicals the strength of the filters need to increase to handle both of these conditions. The material needs to be compatible with the chemistries and capable to handle the elevated temperatures and pressures. The three dimensional pore structure need to be able to hold up and not compress with high viscous chemicals being forced through the medias pore structure. The filter needs to be properly designed for the application.

ProductMembraneMain Construction MaterialGrade
PPPESHydrophobic PTFEHydrophilic PVDFNylonGlass FiberMetalSpecialtyPPMetalSterilizingBio-Burden Reduction / Clarification
TefloFlow HT →
PSSF Pleated SS →
PSSC Pleated Felt SS →
CSSC Sintered Wire Cloth SS →
SSPS Sintered SS Powder →
TIC Sintered Titanium Metal →

View Key Features & Benefits by Series | High Temperatures or High Viscosity

TefloFlow HT Series

FBProductGroup

TefloFlow HT Filter Cartridges are composed of hydrophobic PTFE membrane with polyphenylene sulfide (PPS) support layers, and oxidation-stabilized polypropylene hardware. This filter series is recommended for ozonated water venting applications, sterile gas, and high temperature liquid filtration.

Hydrophilc and Hydrophobic PTFE membrane filters with PPS supports

Oxidation-resistant materials provide longer service life in critical air and vent applications
Exceptionally high flow rates at low pressure drops
Rugged construction offers outstanding stability during steam sterilization
Wide chemical compatibility

Quality Assurance

Manufactured in a facility which adheres to ISO 9001:2015 Practices.
100% Integrity tested and lot traceable.

Indirect Food Additive

All component materials meet the FDA Indirect Food Additive requirements cited in 21 CFR 177–182 andd 1935/2004 EC.

Specs, Flow Curves, and Part Number Configurator →